The essence of the batik process is to produce a design on textiles through the use of a dye-resist. The resist, usually wax (but other materials such as rice paste are also employed), prevents the dye from penetrating the covered areas of the fabric, thus creating a pattern in negative. Additional wax is added to embellish the design or preserve areas in the color of the initial dye bath. The cloth is then dipped in a second dye bath. This process is repeated a number of times depending on the number of dyes involved. Producing a high quality piece of batik fabric is time consuming and requires a high degree of skill.
Batik workers sit on low stools
with the cloth they are working on draped over a bamboo frame called gawanagan.
Next to them is a simple kerosene stove with a small iron wok called wajan,
which is filled with molten wax. The main elements of the design are usually
penciled onto the fabric, but many of the details are added freehand. Very
experienced artisans can wax designs, using a canting (pronounced "tjanting")
directly to the cloth from memory.
The canting is the most important tool of the Batik artisan. The canting is
a small, thin-walled, spouted, copper vessel which resembles the bowl of a
pipe. The implement is filled with molten wax and held like a stylus. The
batik artist draws designs on a length of cloth using the wax that flows from
the canting's tiny, downward-curving spouts. The number of spouts, their widths
and endings, can be varied to achieve different effects with great precision.
For fine detailed work a canting with a spout about one millimeter in diameter
is used. A wider spout is used to fill in larger design areas.
To begin work the batik waxer holds
the canting in the hot wax for about a minute to heat it up. Then she fills
it just so - not too little, not too much - takes it out of the wax, wipes
the excess from the outside of the copper bowl on the side of the pan and
blows on the tip of the spout to remove any excess wax there. Her movements
must be very decisive and quick in applying the wax to the cloth. Any hesitation
results in a blob of wax instead of the intended small dot or line. The wax
cools quickly, so after a minute or so she must dip the canting in the wax
and begin again. The process takes a great deal of patience and concentration.
These are qualities highly valued by the Javanese.
In order to achieve more than a vicarious understanding of the techniques
of making batik, I traveled to Yogyakarta, Java, to study with a batik artist
named Paksi. The young women who worked in Paksi's studio, enjoying their
role as teachers, shared some of the tricks of the trade with me. Yantee showed
me how to hold the cloth so that I would always be working horizontally from
left to right, which is a more natural and therefore easier stroke to make.
Satikum showed me how to remove my mistakes, if they were big ones (small
mistakes can just be incorporated into the design). First she wet the area
around the wax she wanted to remove. Then she took a knife that has been heated
on the burner and alternately melted and scraped until the wax was removed.
She also showed me how to clean out the spout of the canting with a broom
straw when it became clogged with a little particle of dirt.
Before the fabric is dipped in dye
it must be washed with soap and water and then rinsed with clear water. There
are a number of ways to apply the dye. The entire piece may be dipped in the
dye bath. If more than two or three colors are to be used, colors of small
details are frequently daubed on with a cotton swab, then waxed over to protect
them from further dying The widely used chemical indigo dye is light activated:
the initial application of the indigo dye appears reddish-brown on the cloth,
but when it is exposed to sunlight it dramatically turns a deep shade of blue.
The dyer must take the vagaries of the weather into account when he sets his
schedule.
When the cloth has dried, new areas that are to retain the color of the first
dye color are waxed. In traditional Solo batik the wax is scraped off from
areas which are to be dyed brown. This results in the characteristic fuzzy
color of Solonese batik. On the North Coast of Java the first wax is boiled
out and the waxing process starts over again. This results in designs with
clearer definition. In some modern batik design only part of the wax is removed
from the background area resulting in a mottled effect. The process is repeated
until all the desired colors have been dyed. After the final dying, the cloth
is boiled to remove all of the wax. There is always some remnant of wax remaining
in the cloth which gives batik its characteristic stiffness and lovely smell
of beeswax.